Jacob & Co. Grand Complication Masterpieces Twin Turbo replica watch

The avatar of irrational prosperity.

One of the most enjoyable booths to visit during the Basel Watch Fair is the booth of replica Jacob & Co., which stands in stark contrast to most other booths at the fair. Although exhibitors’ booths are often domino clocks or gems covered with gems (this is a replica watch and jewelry show, with few exceptions, exhibitors are showing one or more). After the glass blank rine chant, you will not only get the glass blank at the carat weight of the ridiculous oversized diamonds, sapphires, rubies and emeralds, but also the glass blank after the glass pot chant, some of the most extroverted and mechanically complex on the clock The clock of the entertainment device on the wrist was pressed down. Jacob & Co. seems to have positive cash flow and can do more or less what they want, and boys, they can do what they want. This year’s Twin Turbo Furious is an example of their almost relentless approach to watchmaking.

Twin Turbo Furious is a (deep breathing) dual, three-axis sequential high-speed flying tourbillon, a decimal minute repeater and a single-button chronograph with a reference time difference indicator and a power reserve indicator. The two three-axis tourbillons are connected by a differential, which averages the frequency of each oscillator-theoretically this should yield a single average speed that is higher than the stability of a single oscillator alone, although A cursory glance at replica Twin Turbo Furious should make it clear that this is an amazing factor, not an obsession with the chronograph, which prompted the design of this magnificent bug-eye monster. The tourbillon rotates every 24 seconds, 8 seconds and 30 seconds from the innermost to the outermost,

For most of us, the most mysterious complication will be the so-called reference time difference. This is a chronograph function; the reference time difference allows you to determine whether the elapsed time period is greater or less than the selected reference time. You can use the crown (located in the second position) to set the reference time, which is displayed in Arabic numerals at six o’clock on the dial (in the top image, the selected reference time is three minutes and ten seconds). The position of the external “pit board” (taken from motorsport) is also changed. You will notice that the zero on the pit board is 10 seconds. So when you stop the chronograph, you can immediately read a few seconds faster or slower than the reference time of the elapsed time period; in racing, you can use this feature to assess whether your study time for a particular course The given reference time is faster or slower. I don’t know if this is the first time anyone has created this feature specifically in a chronograph, but I’m pretty sure I’ve never seen it before.

The decimal minute repeater is a variant of the traditional repeater, in which the hour, quarter hour, and minute sound in turn. The decimal repeater is a modern invention, in which the hours sound, then the interval of ten minutes after the hour, and then the minutes. The complication was invented by Kari Voutilainen, and his decimal repeat best luxury replica watches came out in 2005 (this is my only meaningful contribution to horology, which is the creation of the term “decimal repeater” for this complication, which It’s a fact I didn’t mention in the opportunity) to show myself, which is less than I want. To prevent damage to the repeater, the time setting is blocked if the chime sequence is in progress.

50 hours of power is stored in the copy watch through a folding crank, the operation of which is very reminiscent of the film rewind lever set in the film camera knob.

The front of the Twin Turbo Furious replica watches may be classic, and the clocks before the financial crisis were bold, but all these complexities are obviously supported by extremely complex mechanisms. Given that the other cars on the dial side are also McLaren’s atmosphere, it is surprising and very interesting that this movement-Jacob’s movement JCFM05-is in some ways very modern and has also been used a lot. Classic finishing techniques.

The movement is more or less divided into three levels-at the top we have hammers for the repeater mechanism; in the middle we have timing gears, column wheels and levers. At the bottom, we equip the dual three-axis tourbillon and the tourbillon itself with complex skeleton drive wheels.

Although the architecture is absolutely unconventional (with little else considering its complexity), many steel structures are treated in a very traditional way, with the help of black polishing, it also brightens up the mirrors on trains. Sinking.

The chronograph’s actuating lever (your bearing head in the picture above is on the left side of the column wheel) can be taken directly from the Richard Miller replica or AP concept table, in sharp contrast to the absolutely classic relay hammer.

Twin Turbo Furious replica is 57mm x 52mm; JCFM05 caliber is 34mm x 46mm x 13.7mm, with 832 components. The equilibrium frequency is 21,600 vph. 50 hours power reserve; 30m water resistance. Here you can see an 18k rose gold or black DLC coated titanium and carbon fiber case.